Wet and electric systems · Kildare

Underfloor Heating in Kildare: Wet, Electric and Retrofit Systems

Find a local installer for wet underfloor heating, electric mats or a low-profile retrofit across Kildare. 2026 prices per m², heat pump guidance and plumbers working from Naas to Leixlip.

The basics

Wet or Electric: What Underfloor Heating in Kildare Involves

Underfloor heating in Kildare comes in two forms. Wet systems circulate warm water through pipes laid in the floor screed, running off a boiler or, ideally, a heat pump, and suit whole houses, new builds and extensions. Electric systems use thin heating mats or cable under tile, and suit bathrooms and single-room retrofits. Which one suits your home comes down to how much floor area you are heating and what your heat source is.

The installers listed here cover the whole county, taking in Naas, Newbridge, Maynooth, Celbridge, Leixlip, Athy, Clane, Kilcock, Kildare town and Monasterevin. Enquire directly about wet, electric or low-profile retrofit systems.

How Long Does Underfloor Heating Take in Kildare?

A wet single-storey system takes two to four days plus screed curing. An electric bathroom mat is usually a one-day fit under the tiler.

SEAI Grants for Kildare Homeowners in 2026

Up to €6,500 for a heat pump and €1,200 for solar water heating, through SEAI-registered contractors. Underfloor heating is the ideal heat-pump partner.

Local coverage

Underfloor Heating Across Kildare: The Areas Covered

Kildare is one of Ireland's fastest growing counties, driven by its position in Dublin's commuter belt. Towns including Naas, Newbridge, Maynooth, Celbridge and Athy have all seen significant residential development and the natural gas network has expanded to serve this growth. Demand for gas boiler installation, first-fit connections and annual service work is very high in Kildare, and there is a strong supply of RGI registered installers to serve the county's large and growing population.

Kildare has two distinct housing profiles. The north and east of the county, in towns like Maynooth, Celbridge and Leixlip, are effectively part of the greater Dublin metropolitan area with dense 1990s-to-2010s estate housing. The south and west around Athy and Monasterevin has older housing stock including many traditional farmhouses.

Kildare sits on the exposed central plain and experiences harder frosts than coastal counties. The Curragh and surrounding flat land creates a wind-chill effect that makes outdoor pipe runs and external boiler flues more vulnerable in winter.

Naas and Newbridge have strong local plumbing trades. The north Kildare towns of Maynooth and Celbridge are also well served, often by Dublin-based contractors who operate across the county boundary. Rural south Kildare relies more heavily on local one-man operations.

Naas
Newbridge
Maynooth
Celbridge
Athy
Kildare Town
Monasterevin
Leixlip
Clane
Kilcock

Every area above is served by installers in the Kildare plumber directory.

Installer fitting wet underfloor heating in a home in Kildare Underfloor heating pipework being laid out in Kildare

The options

Wet, Electric or Retrofit Underfloor Heating in Kildare

Natural gas network coverage is extensive across Kildare's commuter towns including Naas, Newbridge, Maynooth, Celbridge, Leixlip and Athy, reflecting the county's high population density and housing development.

Wet underfloor heating pipe loops laid before the screed in a Kildare home

Wet Underfloor Heating

Warm water pipes in the floor screed, run off a boiler or heat pump. The efficient choice for new builds and larger homes across Kildare, where the whole floor heats evenly at a low temperature. Supply and fit.

from €60/m²
Electric underfloor heating mat set under tile in a Kildare bathroom

Electric Underfloor Heating

Thin heating mats or loose cable set under tile or stone, controlled by a room thermostat. Quick to fit and the common choice for bathrooms, en-suites and single-room retrofits. Supply and fit.

from €50/m²
Low-profile underfloor heating overlay board fitted in a Kildare renovation

Retrofit / Low-Profile UFH

Slim overlay panels add just 15 to 20 mm to the floor, letting wet underfloor heating retrofit into an older Kildare home without lifting the slab. A common choice during extensions and full renovations.

from €70/m²

2026 prices

Underfloor Heating Cost in Kildare 2026: Prices From Naas to Leixlip

Typical supply-and-fit Kildare ranges. All figures include labour and VAT at 9%.

Wet UFH per m²

€60–€90

Whole floor, pipes in screed, supply and fit

Electric UFH per m²

€50–€75

Mat or cable under tile, supply and fit

Single-room electric

€600–€1,100

Bathroom or en-suite, fitted

Whole-house wet system

€6,000–€12,000

New build or full retrofit, all zones

Manifold and zoning

€400–€900

Per manifold, sets the room-by-room control

Kildare's water comes from the River Liffey and the Grand Canal system, with moderate hardness across most of the county. The Leixlip treatment works serves a large part of north Kildare and eastern Co. Dublin. Limescale management in combination boilers is a consistent issue in the commuter-belt towns.

SEAI grants

SEAI Grants for Kildare Heating Upgrades

Underfloor heating pairs perfectly with a heat pump, and SEAI grants are available for heat pump installation (up to €6,500) and solar water heating (€1,200). The underfloor heating itself is not separately grant-aided, but as part of a heat-pump upgrade it delivers low running costs, and work must be carried out by an SEAI-registered contractor before any grant can be claimed. A fabric-first upgrade makes the biggest difference, and SEAI-registered insulation contractors covering Kildare are listed at wallinsulationireland.ie.

See SEAI-registered plumbers →
€6,500
Heat pump installation
€1,200
Solar water heating

Hiring

How to Find an Underfloor Heating Installer in Kildare

Underfloor heating is a specialist fit best handled by an experienced plumber or heating installer in Kildare. Here is how to choose and hire correctly.

Underfloor heating installation in progress at a home in Kildare
01

Browse Local Plumbers in Kildare

Every plumber listed in the Kildare plumber directory works locally and can be contacted directly. Browse the county, find heating installers near you, and enquire about wet or electric underfloor heating. No fees and no sign-up to get in touch.

02

Get Three Written Quotes for the Work

Quotes should specify whether the system is wet or electric, the floor build-up, the number of heating zones, the manifold and the controls. A quote without a floor plan and zone layout is incomplete, since the specification affects both comfort and running costs.

03

Confirm the Heat Source and Controls

Wet underfloor heating runs best at low flow temperatures, so confirm whether it will pair with a heat pump, a boiler or a blend of both. Ask about weather compensation and room thermostats, as good controls are what make underfloor heating cheap to run.

04

Agree the Screed and Commissioning Steps

For a wet system the installer should pressure-test the pipework before the screed goes down and commission the manifold once the floor has cured. Ask for the commissioning sheet and the manufacturer warranty on completion, and keep them with your home file.

Underfloor Heating in Kildare: Common Questions

How much does underfloor heating cost in Kildare in 2026?

Wet underfloor heating costs €60 to €90 per square metre supplied and fitted across a whole floor in Kildare. Electric underfloor heating is €50 to €75 per square metre, and a single bathroom in electric mat runs €600 to €1,100 fitted. A whole-house wet system is €6,000 to €12,000. Figures include labour and VAT at 9%.

Is wet or electric underfloor heating better in Kildare?

Wet underfloor heating is the better choice for a whole house or new build in Kildare, running cheaply off a boiler or heat pump across large areas. Electric underfloor heating suits single rooms such as bathrooms and en-suites, where it is quick to fit but costs more to run over a full house.

How long does underfloor heating take to install in Kildare?

A wet underfloor heating system for a single storey in Kildare takes two to four days to lay and commission, plus screed curing time before you run it fully. An electric mat in one bathroom is usually a one-day fit under the tiler. Whole-house wet systems in a new build run alongside the wider build programme.

Does underfloor heating work with a heat pump in Kildare?

Underfloor heating and heat pumps are an ideal pairing. Underfloor heating runs at low flow temperatures, exactly where a heat pump is most efficient, so together they give low running costs. Kildare homeowners can claim SEAI grants of up to €6,500 for a heat pump, which makes the combination attractive for new builds and deep retrofits.

Does underfloor heating suit an older home in Kildare?

Yes, in most cases. Many older Kildare homes take underfloor heating well, either as a wet system in a new extension or as a low-profile overlay that avoids lifting the existing slab. Paired with a heat pump it gives the efficient, even heat that older rural houses in Kildare often lack, and electric mats cover single-room upgrades.

How do I find an underfloor heating installer in Kildare?

Browse local plumbers and heating installers across Kildare on plumbersinireland.ie, then request quotes directly. Ask for three written quotes that set out the system type, floor build-up, zones and controls, and confirm whether the installer has fitted underfloor heating with a heat pump before.

Get Underfloor Heating Quotes in Kildare

Underfloor heating in Kildare, from wet screed systems to electric bathroom mats and heat-pump pairings, matched to local plumbers near you. Free, no obligation, reply within 24 hours.

Browse Kildare plumbers Plumbers and heating installers across Kildare, ready to quote for wet or electric underfloor heating. Go now