Outdoor and garden taps · Kildare

Outdoor Tap Installation in Kildare: Standard and Frost-Proof Taps

Find a plumber for a standard outdoor tap, a self-draining frost-proof tap or a longer garden run across Kildare. 2026 prices, frost protection advice and local plumbers from Naas to Leixlip.

The job

Fitting an Outdoor Tap in Kildare: What’s Involved

Fitting an outdoor tap in Kildare means teeing off the rising main inside the house, drilling a neat core through the external wall, and finishing with a double check valve and an indoor isolation valve. The check valve keeps garden water out of your drinking supply, the isolation valve lets you drain the tap before winter, and a frost-proof tap does that draining for you every time you close it.

The plumbers listed here cover the whole county, taking in Naas, Newbridge, Maynooth, Celbridge, Leixlip, Athy, Clane, Kilcock, Kildare town and Monasterevin, for garden taps, frost-proof replacements and longer irrigation runs.

How Long Does It Take to Fit a Tap in Kildare?

A standard tap teed off a nearby mains pipe is usually fitted in one to two hours. A longer feed across the garden takes more time to route and bury.

Frost Protection for Kildare Winters

A self-draining frost-proof tap empties its exposed section every time you close it, so there is nothing left to freeze and split when a hard frost arrives.

Local coverage

Outdoor Tap Installation Across Kildare: The Areas Covered

Kildare is one of Ireland's fastest growing counties, driven by its position in Dublin's commuter belt. Towns including Naas, Newbridge, Maynooth, Celbridge and Athy have all seen significant residential development and the natural gas network has expanded to serve this growth. Demand for gas boiler installation, first-fit connections and annual service work is very high in Kildare, and there is a strong supply of RGI registered installers to serve the county's large and growing population.

Kildare has two distinct housing profiles. The north and east of the county, in towns like Maynooth, Celbridge and Leixlip, are effectively part of the greater Dublin metropolitan area with dense 1990s-to-2010s estate housing. The south and west around Athy and Monasterevin has older housing stock including many traditional farmhouses.

Kildare sits on the exposed central plain and experiences harder frosts than coastal counties. The Curragh and surrounding flat land creates a wind-chill effect that makes outdoor pipe runs and external boiler flues more vulnerable in winter.

Naas and Newbridge have strong local plumbing trades. The north Kildare towns of Maynooth and Celbridge are also well served, often by Dublin-based contractors who operate across the county boundary. Rural south Kildare relies more heavily on local one-man operations.

Naas
Newbridge
Maynooth
Celbridge
Athy
Kildare Town
Monasterevin
Leixlip
Clane
Kilcock

Every area above is served by plumbers in the Kildare plumber directory.

Plumber fitting a new outdoor tap at a home in Kildare Garden tap and pipework being installed in Kildare

The options

Standard, Frost-Proof or Garden Feed in Kildare

Natural gas network coverage is extensive across Kildare's commuter towns including Naas, Newbridge, Maynooth, Celbridge, Leixlip and Athy, reflecting the county's high population density and housing development.

New standard outdoor tap fitted to an external wall at a Kildare home

Standard Outdoor Tap

A brass bib tap teed off the mains and brought through the external wall on a short run. A common request across Naas and the larger towns in Kildare. Supply and fit.

from €120
Longer outdoor pipe run feeding a garden tap at a property in Kildare

Garden & Irrigation Feed

A dedicated feed run to a shed, a polytunnel or the far end of a garden, common on the bigger plots around Kildare. Priced by the extra metre, with its own isolation valve.

from €250
Frost-proof self-draining outdoor tap installed at a home in Kildare

Frost-Proof Tap

A self-draining tap with its shut-off set back inside the warm wall, so the outer section empties every time you turn it off. The reliable option for exposed walls and hard winters.

from €180

2026 prices

Outdoor Tap Cost in Kildare 2026: Prices From Naas to Leixlip

Typical fitted Kildare ranges. All figures include labour and VAT at 9%.

Standard outdoor tap fitted

€120–€250

Teed off the mains, brought through the external wall

Frost-proof outdoor tap

€180–€350

Self-draining tap that empties itself in cold weather

Longer pipe run

€25–€45

Per additional metre across the property

Isolation valve and check valve

€60–€120

Backflow protection with an indoor shut-off

Garden irrigation feed

€250–€600

Dedicated feed for irrigation or a water butt

Kildare's water comes from the River Liffey and the Grand Canal system, with moderate hardness across most of the county. The Leixlip treatment works serves a large part of north Kildare and eastern Co. Dublin. Limescale management in combination boilers is a consistent issue in the commuter-belt towns.

Frost and water

Frost Protection and Backflow in Kildare

Two small parts make an outdoor tap in Kildare worth having. A double check valve protects your mains, keeping garden water from being drawn back into the drinking supply. A frost-proof tap prevents the winter burst pipes that follow a hard frost, by emptying its exposed section every time you close it. On any exposed wall, both are money well spent.

Read our frozen pipes guide →
Frost-proof
Self-draining tap stops winter bursts
Under 2 hours
Typical fitting time for a standard tap

Hiring

How to Find a Plumber to Fit an Outdoor Tap in Kildare

Fitting an outdoor tap in Kildare is straightforward plumbing work. Here is how to find the right plumber and what to agree before they start.

Outdoor tap installation in progress at a home in Kildare
01

Browse Plumbers in Kildare

Every plumber listed in the Kildare plumber directory covers outdoor and garden tap work. Browse the county, find plumbers near you, and contact them directly to arrange a visit.

02

Agree the Tap Position and Pipe Run

Settle on where the tap will sit and how far the pipe has to travel from the mains. A short run through a nearby wall keeps the cost down, while a feed to the far end of the garden is charged by the extra metre. Confirm the route before work starts.

03

Confirm Backflow Protection Is Included

An outdoor tap should always have a double check valve fitted so garden water cannot be drawn back into the household supply. Ask that a check valve and an indoor isolation valve are part of the quote, not an extra found on the day.

04

Ask About Winter Drain-Down

If you fit a standard tap rather than a frost-proof one, you need a way to drain it down before the first hard frost. A good plumber fits an indoor isolation valve with a drain point so you can empty the outdoor section each winter and avoid a burst pipe.

Outdoor Tap Installation in Kildare: Common Questions

How much does it cost to fit an outdoor tap in Kildare in 2026?

A standard outdoor tap teed off a nearby mains pipe costs €120 to €250 in Kildare. A frost-proof tap runs €180 to €350, and a longer garden feed adds €25 to €45 per extra metre. A check valve and isolation valve add €60 to €120. Figures include labour and VAT at 9%.

Frost-proof or standard outdoor tap in Kildare?

A standard tap holds water to the outlet and can freeze in a cold snap unless drained down each winter. A frost-proof tap empties its exposed section every time you close it. Given Kildare winters, a frost-proof tap is the safer choice for any exposed or north-facing wall.

Do I need a check valve on an outdoor tap in Kildare?

Yes. A double check valve is fitted on the supply to any outdoor tap in Kildare so that water from a hose or garden feed cannot be drawn back into your drinking supply. It is standard practice on a properly fitted tap and should be included as a matter of course.

How long does it take to fit an outdoor tap in Kildare?

A straightforward outdoor tap teed off a nearby mains pipe is usually fitted in one to two hours, including drilling the external wall and fitting an indoor isolation and check valve. A longer run to the far end of a garden takes longer to route and, where needed, bury below the frost line.

Can a tap reach the far end of a large Kildare garden?

Yes. On the larger plots common across Kildare, a dedicated feed can be run to the far end of the garden, a shed or a polytunnel. The pipe is priced by the extra metre and is normally buried below the frost line with its own isolation valve so it can be shut off and drained in winter.

How do I find a plumber to fit an outdoor tap in Kildare?

Browse plumbers covering Kildare on plumbersinireland.ie and contact them directly to arrange a visit. Ask that the quote includes a check valve, an indoor isolation valve, and, on any exposed wall, a frost-proof tap.

Get Outdoor Tap Quotes in Kildare

Outdoor and garden tap work in Kildare, from a standard garden tap to a frost-proof replacement or a longer irrigation feed, matched to plumbers near you. Free, no obligation.

Browse Kildare plumbers Plumbers covering outdoor tap work across Kildare, ready to quote. Go now