Local plumbers · Wexford
Hot Water Cylinders in Wexford: Vented, Twin-Coil and Mains-Pressure
Find a plumber for cylinder replacement, a twin-coil solar and heat-pump cylinder or a mains-pressure upgrade across Wexford. 2026 prices, correct sizing and local plumbers from Wexford Town to Ferns.
Hot water cylinders in Wexford
Wexford is predominantly a rural agricultural county with a mix of natural gas coverage in larger towns and LPG or oil heating across the countryside. Wexford town and Enniscorthy are the main centres with natural gas network access, while much of the county relies on alternative fuels. LPG certification is particularly useful for installers operating in the more rural parts of Wexford, where properties are outside the Gas Networks Ireland grid.
Wexford has a high proportion of traditional rural housing including detached bungalows and farmhouses with oil-fired central heating, most of which are now reaching the age where significant system upgrades are due. Wexford Town and Enniscorthy have older town-centre housing with mixed pipe generations. Gorey has grown significantly with new residential estates built to current standards.
The options
Vented, Twin-Coil or Mains-Pressure for Wexford Homes
The right cylinder depends on your mains pressure, hot water demand and whether there is space for a tank.
Vented Cylinder
The default in older Wexford cottages and farmhouses, fed by gravity from a tank in the attic. Reliable and the cheapest cylinder to replace like for like. Supply and fit.
from€600
Heat-Pump / Solar Cylinder
The go-to upgrade across rural Wexford, where solar thermal and heat pumps are common. A twin-coil cylinder stores heat from the renewable source and a boiler or immersion backup.
from€900
Unvented (Mains-Pressure) Cylinder
Runs straight off the mains for strong, balanced pressure at every tap and shower, with no attic tank. Stores water under pressure, so it needs a competent installer.
from€1,200
2026 prices
Hot Water Cylinder Cost in Wexford 2026
Typical like-for-like ranges across Wexford. All figures include labour and VAT.
- Get quotes that name the cylinder make, litre size and grade
- A failed immersion element alone is €150 to €300, not a full swap
- Changing to unvented adds mains checks and a discharge route
Wexford's water supply is primarily surface water from the Slaney River and Poulaphouca Reservoir. Water quality is generally good but hard in parts, particularly around Gorey and north Wexford.
- Cylinder replacement €600–1,100
- Unvented mains-pressure install €1,200–2,200
- Upsizing or relocation €900–1,600
- Immersion element and thermostat €150–300
- Annual check €70–110
Indicative 2026 ranges. Always confirm with a written quote before work begins.
SEAI grants
SEAI Grants for Wexford Water Heating Upgrades
Grants are available for solar water heating (up to €1,200) and heat pump installation (up to €12,500). Both need a compatible twin-coil cylinder, so a cylinder upgrade is often the first step, and work must be carried out by an SEAI-registered contractor before any grant can be claimed.
A fabric-first upgrade makes the biggest difference to running costs, and SEAI-registered insulation contractors covering Wexford are listed at wallinsulationireland.ie.
See SEAI-registered plumbersHiring
How to Find a Plumber for a Cylinder in Wexford
A cylinder swap is standard plumbing work, but an unvented unit needs a competent installer. Here is how to hire correctly in Wexford.
Browse Plumbers in Wexford
Browse local plumbers across Wexford, find someone near you, and contact them directly. For an unvented cylinder, check that they hold the relevant competency, as mains-pressure units carry discharge and safety requirements.
Get Three Written Quotes for the Work
Quotes should name the cylinder make, its capacity in litres, whether it is single or twin coil, and any pipework, controls or discharge work needed. A quote without a stated capacity is incomplete, since sizing drives both comfort and the price you pay.
Confirm SEAI Registration if Claiming a Grant
A compatible twin-coil cylinder is part of any solar water heating or heat pump job. Where a grant is involved, the wider works must be carried out by an SEAI-registered contractor, so confirm registration before the cylinder is ordered.
Get Your Commissioning Paperwork and Warranty
An unvented cylinder must be commissioned with its discharge pipe, expansion vessel and safety valves set correctly. Keep the commissioning record and register the warranty, as most manufacturers require an annual check to keep cover in place.
Local coverage
Hot Water Cylinders Across Wexford: Areas Covered
Wexford is the sunniest county in Ireland, but this mild reputation can give a false sense of security. Cold easterly winds in January and February can produce sharp frosts, and coastal properties face salt air corrosion on exposed metalwork.
Wexford Town and Enniscorthy have established plumbing businesses capable of handling both domestic and commercial work. Gorey is increasingly well served due to its growth. New Ross has specialist contractors experienced with the older buildings in the town. Rural areas across the county are generally well covered by mobile tradespeople.
Every area above is served by registered plumbers in the Wexford plumber directory.
Common questions
Hot Water Cylinders in Wexford: Common Questions
How much does it cost to replace a hot water cylinder in Wexford in 2026?
A like-for-like vented copper cylinder replacement costs €600 to €1,100 in Wexford, including labour and VAT. A full unvented mains-pressure install runs €1,200 to €2,200, upsizing or relocation is €900 to €1,600, and an immersion element and thermostat is €150 to €300.
Vented or unvented cylinder: which is better in Wexford?
A vented cylinder is cheaper and simpler where a loft tank already feeds the house, but pressure depends on the height of that tank. An unvented cylinder gives mains pressure at every outlet with no attic tank, at a higher price and with stricter safety requirements. Wexford homes with power showers and multiple bathrooms usually benefit most from unvented.
What size hot water cylinder do I need for my Wexford home?
Sizing follows the number of bathrooms and occupants rather than the county. A one or two-bathroom Wexford family home is typically well served by a 150 to 210 litre cylinder, while larger homes with several bathrooms move to 250 to 300 litres. Your plumber sizes the cylinder to peak demand so you are not left short or heating water you never use.
What are the benefits of a mains-pressure unvented cylinder in Wexford?
An unvented cylinder delivers strong, balanced hot and cold pressure at every tap and shower in your Wexford home, removes the need for an attic tank, frees up loft space and cuts the risk of tank freezing or contamination. The trade-off is a higher fit cost and a required annual safety check.
Is there enough mains pressure for an unvented cylinder in Wexford?
Most homes on the public mains in Wexford have enough flow for an unvented cylinder, but rural properties on a private well or a shared group scheme may not. Your plumber checks the incoming flow and pressure first, and where the mains is weak a vented cylinder or a pumped system is the better fit.
How do I find a plumber for a cylinder in Wexford?
Browse local plumbers across Wexford on plumbersinireland.ie and request quotes directly. For an unvented cylinder, confirm the plumber holds the relevant competency, as mains-pressure units carry discharge and safety requirements that a standard vented swap does not.
Get Hot Water Cylinder Quotes in Wexford
Cylinder work in Wexford, from vented swaps to unvented mains-pressure and twin-coil upgrades, matched to local plumbers near you. Free, no obligation, reply within 24 hours.
Browse Wexford plumbers